전체상품목록 바로가기

본문 바로가기



[P0000IHL] LaserBot /메이크블럭 로봇

(해외배송 가능상품)
공급사 바로가기
LaserBot /메이크블럭 로봇
이전상품 다음 제품 보기 확대보기
추천메일 보내기 상품조르기 대량구매문의
기본 정보
상품명 LaserBot /메이크블럭 로봇
판매가 560,000원
적립금 16,800원 (3%)
상품코드 P0000IHL
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
LaserBot /메이크블럭 로봇 수량증가 수량감소 560000 (  16800)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

이벤트

상품상세정보

LaserBot

LaserBot is a desktop laser engraver developed on Makeblock's open-source platform. Equipped with 1.6W 445nm high power solid-state lasers, and cooperating with its software mLaser, LaserBot can easily engrave and cut many things for you, and help you to make surprises in daily life. For instance, making Christmas cards/birthday cards for your families, or engrave your honeymoon photos on the wood for decoration, etc.

Engraving graphic display

LaserBot uses a beam of light to cut, engrave, and shape designs from a variety of materials.

 

Features

• Simple but solid H-shaped structure;

 

• High-precision anodized aluminum alloy;

 

• Arduino compatible;

 

• User friendly software;

 

 

 

Capability:

1. 1.6W 445nm semiconductor and Solid laser: The rotation speed of its high power laser head can reach up to 200mm/s, so that LaserBot is twice as efficient as XY Plotter (with Laser Engraver Upgrade Pack) . You will save more time to realize your ideas!

 

2. Megapi: The powerful mainboard MegaPi brings you unprecedented experience of laser engraving. It not only has superpower to control various motors, but also very easy to use. Moreover, you can also combine it with Raspberry Pi to explore more.

  

3. High-precision: Up to 0.1mm, carefully engraves every details.

 

4. Engraving area: Up to 383mm×367mm

  

 

Software:

mLaser: This is a new software for LaserBot, our DIY laser cutter. It includes both simple mode and expert mode for different levels of users. Also we simplified the operation and setting procedure to save more time. Therefore, it is so user friendly that everyone can use to control LaserBot.

 

 

Safety:

Goggles: Specifically designed Goggles for LaserBot to protect your eyes during laser engraving.

 
 

Velcro sticker pad for Laser head: In order to avoid excessive scattering of laser, we specially designed Velcro sticker pad for Laser head. Only one step needed to install the Velcro sticker pad to laser head.

WARNING

Wavelength γ= 445nm blue-violet diode laser

DO NOT directly irradiate eye or skin by the laser beam.

 

WARNING: As laser energy gains higher density, make sure corresponding protection measures are taken while using.

• No direct eye-contact with the laser light path;

• DO NOT irradiate others by the laser;

• Keep away from children and other people who are not familiar with laser usage;

• When the laser is used, take eye protection measure;

• When certain materials are cut by the laser, it is possible for them to produce toxic smoke, take ventilation measures.

 

 

Comparison to XY Plotter
(with Laser Engraver Upgrade Pack)

If you're trying to figure out the difference between LaserBot and XY Plotter (with Laser Engraver Upgrade Pack), check this comparison chart.

 

LaserBot

XY Plotter
(with Laser Engraver Upgrade Pack)

Main Control ChipATMEGA2560-16AUArduino Uno
Extension Ports1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Slide
4.MegaPi (Controller)
5.Stepper Motors
6.MegaPi Stepper Motor Drivers
7.1.6W 445nm High-Power Solid State Laser
8.Micro Switch
9.Cables
10.Other Hardware and Accessories
1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Shaft 4.D8×496mm Linear Motion Slide Unit 8mm
5.Makeblock Orion(Controller)
6.Stepper Motors
7.Stepper Motor Drivers
8.9g Micro Servo Pack
9.500mW 405nm High-Power Solid State Laser
10.Micro Switch
11.Cables
12.Other Hardware and Accessories
ElectronicsMegaPi (Controller)Makeblock Orion(Controller)
Laser1.6W 445nm High-Power Solid State Laser500mW 405nm High-Power Solid State Laser
CommunicationUSB Type BMicro USB
SoftwaremLasermDraw & Benbox
Supports file type*PNG, *JPG, *BMP, *SVG, *DXFSVG(mDraw) JPG, PNG, BMP, GIF, DXF(Benbox))
Power Supply100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A100-240 V~50/60Hz AC/DC Power adapter, 12V/3.0A

상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,500원
  • 배송 기간 : 2일 ~ 3일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

교환 및 반품정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

서비스문의


상품사용후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

상품문의하기 모두 보기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

상품문의하기 모두 보기

0

이전 제품

다음 제품

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close